[讨论]映射问题 [复制链接]

55555555我为了这个问题已经熬了2个晚上了，谢谢IBM大哥了，

之前我这里是只可以内网进，外网44405不可以进，用55901可以进，可改了ServerList后，情况又反过来了

哎, 熬一下解释给你听吧

serverlist.dat的IP, 就是CS提交给客户端的GS IP, 说明白点就是告诉客户端, GS在哪

如果是用了内网IP, 人家外网的客户端就会去连自己内网的那个IP, 结果当然就是连不上啦, 现象就是点线断开

后来换了外网IP, 结果就好啦, 外网的就可以来连你了

后来内网不能访问的原因, 我说得很清楚了, 首先你内网连CS, 一定是用内网IP
虽然这样可以连上, 但是CS提交的是外网IP, 而这个IP内网不能连接, 所以还是点线断开

这个 "内网不能访问网关外网IP" 的情况, 是路由器太次的原因, 所以我说找升级和更换, 就是这个意思

袄，终于明白了，证明我设置的是没问题的，还是硬件的问题了，对了IBM大哥，我做反恐做的映射是成功了

那我用映射软件也没用了吗？

没用, 那是给用机器做路由用的

爆头没问题是因为...内网用内网IP进, 外网用外网IP进, 哪来问题捏?

我那唯一的办法就是升级硬件了？

有个笨方法的, 就是去搞个域名, 捆在你IP上

然后在你内网所有机器上, 都在hosts文件里面加入把域名解析为内网IP

然后内外网都用域名来连接, 搞定

用花生壳就可以了吧？我听他们有的人说直接在hosts里加IP也可以啊，可我+了也没什么反应呀

127.0.0.1 localhost

内网IP 外网IP

IBM哥哥是应该这么加吗？

是
游戏服务器内网IP 域名

# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host

127.0.0.1 localhost
127.0.0.1 外网IP

这样就可以了吗？但怎么好象还是没用啊？

IBM大哥睡了吗？

# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host

127.0.0.1 域名

127.0.0.1 本机“192。168。1。2

# Copyright (c) 1993-1999 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host 127.0.0.1 域名 127.0.0.1 本机:192.168.0.3

还是不行呀上面的必须要用域名吗？用我的固定IP不可以吗？

请参照这~~
[em05]

# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
127.0.0.1 域名


我这样设置了，可用域名登陆后，还是显示和服务器连接中断呀

我顶~~~

我换花生壳后，外网和内网都进不去了，可外网用域名可以开网页了

路游器上设置`````````````

NET服务器里面有